The HDCATS-100 is a unique device that extends HDMI + Ethernet (100baseT) over a single CAT5 or CAT6 cable up to 100m with IR Passthru from the remote location back to the source location.

Key Features:

HDMI 1.3 compliant - supports 1080p video, Deep Color, lossless HD audio and is backwards compatible with first generation HDMI equipment.

3D compatible - we've tested the extender with
Blu-ray 3D and SKY+ HD 3D.

HDMI + Ethernet - Deliver HDMI plus Ethernet simultaneously over a single cable - ideal for retrofit jobs where running a second CAT5 cable is impractical or financially not viable.

IR Passthru - control your Source or Display from the remote Zone.

Extend HDMI out to 100m - HDBaseT 'packetizes' the HDMI signal and is the most stable solution for extending your HDMI signals.

Local HDMI Port*- view the connected Source on a Local or the remote 'extended' Display.

*Requires the connected Displays to fully support Hot-Plug Detect!

Installer friendly:

Single cable install - deliver HDMI + Ethernet over a single CAT5 or CAT6 cable.

Twisted pair compatibility - works with CAT5, CAT6 and CAT7 cable.

Long run stability - delivers HDMI out to 100m without the problems normally encountered with other HDMI Extender options.

RS232 integration - extend the reach of your Control Network.

3-Port Ethernet hub - plug up to three Ethernet equipped devices to the Receiver unit to share your Ethernet connection.

IR integration - send or receive IR to or from the remote Zone.

Screw down lugs - the Tx and Rx units sport optional lugs to enable secure installation in AV Racks or behind Source and Display equipment.

Technical Support - we offer full Pre and Post sales technical support to aid you in planning and configuring your HDMI equipped system.

Cable lengths of 100m are possible with 1080P signals over CAT6 cable.

Transmitter (Tx) Front

External power of both the Transmitter (Tx) and Receiver (Rx) units ensure trouble free operation.

Transmitter (Tx) Rear

IR Passthru enables remote control via the CAT5 cable of all devices at the Source location.

Receiver (Rx) Front

We include an IR Receiver Extender cable + a Four head IR Transmitter Blaster cable to enable simple and effective control of up to four source devices using a programmable remote (not supplied) or your equipment's own remotes.

Receiver (Rx) Rear