 |
NeoPro design Video
Switching and Distribution products from the ground up specifically for
Home Theatre applications.
|
Concord
+ Hornet
|
The Concord 8x8 Matrix switch plus Hornet Wall plates enables High Definition Component Video plus Digital and Analogue Audio matrix switching for high quality Home Theatre and Multi-room applications over low cost Ethernet (CAT5 or 6) cables.
The Concord offer seamless control and switching of up to Eight Source devices to up to Eight Displays with Front panel, IR and optional RS232 and USB control.
For the Home Theatre enthusiast the Concord Matrix switches offer unrivaled performance with plug and play connectivity and HD compatibility at an affordable price.
Key features:
-
HD Component video (YPbPr)
-
Left and Right analog audio
- Digital audio (SPDIF coax), doubles as composite video matrix
- CAT5/6 Outputs
- Separate HD Video and AV signals over CAT5/6
- Active signal equalisation to Hornet wall plates
-
Full non-blocking matrix - All outputs can display the same signal, or different signals.
-
Independent audio and video switching.
-
Cross conversion between both digital audio formats
-
NeoTouch front panel - no moving parts to jam.
-
Multiple control options such as RS232, USB, IR detector (front) and wired IR (rear)
-
Full discrete power control functions
-
Front panel lockout, Front panel blackout
-
Rack mountable with optional black or silver rack kit. (2U chassis)
-
Silver chassis with choice of black or white front panel
- IR remote control included
Hornet Receiver Features :
-
Single gang Decora style module
-
No local power needed - power comes from the Concord
-
Auto-adjusting equalizer for a quick and reliable installation
-
Paintable wall plate - Labels are applied after finish
Specifications:
-
Power Inlet: IEC 320-C14
-
Input Voltage: 90-240VAC 50-60Hz, 8W typical
-
Dimensions: Width: 17" Height: 3.45" Depth 10.5" (not including removable feet)
-
Weight: 12 lbs
-
Video Bandwidth: 140MHz+ (up to 1080p)
- Analog Audio Bandwidth: 0 Hz to 200KHz
-
Digital audio: PCM, LPCM, DD5.1, DTS
- Digital Audio/C-Video Bandwidth: 20MHz
-
RS232 (option): 9600 baud, full two way protocol USB (option): Slave device, Windows driver included, MAC and Linux drivers available, Installs as virtual COM port at 9600 baud
-
Rear IR (option): 3.5mm jack for 5V or 12V blaster input, polarity insensitive
To Order
- please e-mail your Name, Address and a Contact number and we will
contact you by return.
NeoPro sales - john@tmfsolutions.co.uk
|
UK, Irish and European Trade Sales!
|
We are the Official Distributor for NeoPro products in the UK, Ireland and Europe - for Trade inquiries please use the e-mail link shown below.
For
more information on our
NeoPro products
please contact
Joe Fernand on
Tel - 07831 595 828
or e-mail
Tel (+44) 01968 661 803
FAX (+44) 01968 661 807
