The Prowler is an 8x8 or 8x4 Component video plus Analogue or Digital Audio Matrix with integrated CAT5 extenders to deliver HD video plus Analogue and Digital audio up to 300m over a single CAT5 cable.

Click for larger image in a new window!

For the system owner, integrator or installer the Clarity Elite offers unrivalled performance and flexibility.

Eight standard or high definition Component video sources (including 1080p24) along with three Composite or S-Video standard definition sources can be easily switched to up to eight display devices or zones.

Click for larger image in a new window!

Analogue and Digital audio source signals are cross converted for maximum flexibility with each audio Output having independent Volume Control, Tone Control and Lip Sync delay.

Self powered In-wall or free-standing In-room receivers offer maximum flexibility and minimum installation costs

Click for larger image in a new window!

Using the Front Panel, IR, TCP/IP or RS232 the Clarity Elite offers unrivalled control options and flexibility with full integration into the control Libraries of AMX, Control4 and Crestron.

Best in class features include:

• Video, Audio and Power sent down a single CAT5/6/7 cable.
• No power, or ground, needed at the receiver side.
• Perfect for retrofits where only one CAT5/6/7 cable is pre-installed, but video and audio are both needed at the destination site.

Video

• 450MHz bandwidth local ouputs, DC coupled inputs and outputs, for the most demanding video applications.
• 150MHz bandwidth CAT5/6/7 outputs, DC coupled for deep blacks and bright whites, and for black and white transitions without loss of sync.
• Local component video outputs mirror CAT5/6/7 outputs.
• 8 Channels of YPbPr, YCbCr or RGsB video.
• 3 Channels of composite to component video conversion.
• Full control of Contrast, Brightness, Saturation and Hue on the composite inputs.
• 8 Component video zones which can be switched to any of the 11 input channels.

Audio

• Volume, Balance, Bass, Treble and 5 Band Equaliser control of analogue AND digital audio.
• Volume range: 0dB to -99.5dB, and full mute, with 0.5dB step resolution.
• Tone / EQ ranges: +20dB to -20dB, with 0.5dB step resolution.
• Gain settings (+24dB to -99.5dB) for each input, separate gains available for digital and analogue
• Lip sync delay from 0 to 170ms, per zone and/or per input. ?Analogue audio is automatically converted to digital audio, digital audio is automatically converted to analogue audio.
• Both analogue and digital audio is available simultaneously on the outputs.
• 8 coax digital inputs and 8 optical digital inputs w/auto conversion to coax for easy integration with cable boxes.

Control

• TCP/IP, Bi-directional RS-232 and RS-422, Front panel IR sensor, Rear panel IR jack.
• TCP/IP and RS-232 / RS-422 share the same protocol. Protocol allows for polled or instant update modes. Polled or instant update modes are settable on a command by command basis.
• Over 350 discrete IR codes!